When it comes to car care, there are a lot of myths and misconceptions out there about DIY ceramic coating for cars. And while it might seem like a great way to keep your vehicle looking shiny and new, this type of car care can do more harm than good. This blog post will explain why you should avoid doing ceramic coating yourself and leave the job to the professionals instead.

THE DOWNSIDES OF DIY CERAMIC COATING

Here’s the dark side of using DIY ceramic coating for car care. While it might seem like a great idea to coat your car in ceramic, there are some significant downsides to doing it yourself. First, the application process is not easy and can be pretty tricky. If you don’t do it correctly, you could have streaks. And if you’re not careful, you could end up with scratches on your car’s paint job.

Second, DIY ceramic coating can be costly. You might think that coating your car in ceramic yourself will save you money in the long run. However, this is not always the case. It’s often cheaper and easier to take your car to a professional for a ceramic coating.

Professional ceramic coatings last much longer than DIY versions. In many cases, it can last up to four years! They’re also less likely to scratch, producing a more even finish. Leave the ceramic coating to the professionals for the best possible protection for your car’s paint job. In addition, the coating has self-cleaning properties to help keep the vehicle as clean as possible.

WHY PEOPLE ARE INTERESTED IN CERAMIC COATING

Ceramic coatings protect your paint from UV degradation, chemical erosion, bird droppings, tree sap, and acid rain. The coating can even absorb light damage like scratches caused by flying rocks! In addition, it produces a hydrophobic surface that sheds water on its own. This protection helps prevent pretty much anything from sticking. It will leave behind a high-gloss finish that’s easy to clean.

The Differences between Professional and DIY Ceramic Coating

Ceramic coatings protect your car’s paint from UV degradation, chemical erosion, bird droppings, tree sap, and acid rain. The coating can even absorb light damage like scratches caused by dirt particles and light road debris. It produces a hydrophobic surface that sheds water on its own and prevents pretty much anything from sticking. It will leave behind a high-gloss finish that’s easy cleaning too. In addition, a professionally installed ceramic coating will help you maintain the car’s appearance a lot easier.

While it might seem like a great idea to coat your car in ceramic yourself, there are some significant downsides. Most amateurs don’t know the proper procedures to prepare the vehicle before applying a ceramic coating. The results without this preparation work would not look as good if a professional didn’t do the job. In addition, the DIY applier will need a professional to remove streaks that may appear on the vehicle. This will only lead to a more extensive repair cost when the car is taken to a professional.

Before ceramic coatings, iron decontamination and clay bar treatment are two steps professionals do first. The clay bar treatment removes all the rough spots on the car’s body to its original condition. The iron decontamination step ensures that all contaminants are removed from the paint.

The Top 3 Ways Do It Yourself Ceramic Coating Can Go Wrong

Here’s the bottom line: If you’re thinking about doing ceramic coating on your car yourself, think again! There are too many risks involved in trying to do it yourself. Leave the job to the pros and rest easy, knowing that your car is protected from the elements.

So before you try to tackle this project on your own, talk to friends or family first. Make sure they have had experience with ceramic coatings first. Get their advice on what route would be best for you. Here are the top three ways DIY ceramic coating can fail:

1. IMPROPER PREP WORK BEFORE CERAMIC COATING. IF THE VEHICLE ISN’T ADEQUATELY PREPARED, YOU’LL LIKELY HAVE STREAKS OR OTHER BLEMISHES ON THE PAINT JOB. A PAINT CORRECTION PROCEDURE IS ALWAYS THE BEST WAY TO START. PAINT CORRECTION WILL ELIMINATE SWIRL MARKS AND HAZE FROM THE PAINT.
2. INCORRECT APPLICATION OF CERAMIC COATING. IF YOU’RE NOT CAREFUL, YOU COULD HAVE SCRATCHES ON YOUR CAR’S PAINT. BAD STREAKS, SWIRL MARKS, AND HORRIBLE REFLECTIONS CAN ALSO OCCUR. IF THESE HAPPEN, IT’S BEST TO TAKE IT TO A PROFESSIONAL WHO CAN CORRECT IT.
3. POOR QUALITY CERAMIC COATING PRODUCTS. NOT ALL DIY CERAMIC COATINGS ARE CREATED EQUAL. IF YOU CHOOSE A LOW-QUALITY OR INEXPENSIVE PRODUCT, IT MIGHT NOT PERFORM AS WELL AS YOU EXPECT. IN ADDITION, IT CAN EVEN CAUSE SIGNIFICANT DAMAGE TO YOUR CAR’S PAINT JOB. PROFESSIONALS WHO APPLY CERAMIC COATINGS USE PRODUCTS THAT FEATURE 9H HARDNESS. THIS HARDNESS GIVES THE PAINT PREMIUM PROTECTION.

We Are Here to Help You

Are you a car owner interested in ceramic coating to protect your car’s paint surface? We suggest that you should know that doing it yourself isn’t the best option. This is why we are in this business – to help your car shine like it’s new.

At Magna, our trained staff has the experience you need to ensure the job is done right the first time. We utilize state-of-the-art technology to ensure the ceramic coating is done right. We pride ourselves on making sure you are 100% satisfied with the look and feel of your automobile. It’s why so many people have put their trust in us.

Come and see the difference we can make to your vehicle. Connect with us on Instagram, YouTube, or Facebook. Or give us a call to schedule your appointment today. We’ll be delighted to assist you.